Description:
The Radaway Alienta DWJ is a single sliding shower door for an existing alcove or niche opening - just the door element, sized from 1000mm to 1400mm wide, for fitting between two walls that are already tiled and don't need a side panel.
The quoted width is nominal - Alienta's wall-fixing and levelling profiles take up roughly 15-20mm per side, which is what lets the door absorb a slightly out-of-plumb opening without gapping. It sits on the shower tray or directly on a tiled wet-room floor (no upstand required), and the door itself is a single-direction slider rather than a hinged swing, so no clearance is needed in front of the opening for a door arc.
Easy Clean glass coating
Every Alienta panel carries Radaway's Easy Clean hydrophobic coating: water and limescale bead up and run straight off instead of drying onto the glass, so it takes far less scrubbing to keep the panels looking new. See it in use: Easy Clean demo video.
Product features
| 5mm safety glass |
tempered to PN:EN 12150:1, the same standard used across the Radaway range |
| Wall fixing & levelling profiles |
absorb an out-of-plumb opening without a visible gap |
| Silent slider |
door glides on a damped track, no metal-on-metal clatter |
| Fits tray or floor |
no upstand required for a level wet-room install |
What this SKU is
This is the door element only - one sliding panel, for an opening between two finished walls. If your opening needs a side panel as well as the door, see Alienta DWJ+S, which pairs this door with a matching fixed wall.
Downloads
- Assembly instructions (PDF)
- Catalogue sheet (PDF)
- Technical drawing (PDF)
Please note: dimensions quoted are nominal (profile-to-profile actual size is slightly smaller).
(0 ) Reviews:
No reviews yet. Be the first to review!